CF1
Tipologia Piling Machines
Coppia Max 6 Knm
Modalità di lavoro Kelly Bar
Peso 2.5 t
Profondità Max 10 m
Diametro Max 600 mm
Altezza min di lavoro 2,7 m


Hydraulic piling rig CF1

Provided with a special mast divided in two sliding sections with pull-down force given by the counter-slide device to lower the mast group and achieve the lowest headroom working position. The CF2 is equipped with a short locking kelly bar which grant it to reach 10m deep working even under 2500mm. With a max undercarriage width of 1300mm (in working mode), reduceable to just 1000mm in transport mode, the CF2 can move in very narrow places and restricted areas. It could even get into the entrance door of civil buildings! Moreover the undercarriage is provided with rubber crawlers to work safely over fragile or luxury floors.

 

 
 
 
CF1
Tipologia Piling Machines
Coppia Max 6 Knm
Modalità di lavoro Kelly Bar
Peso 2.5 t
Profondità Max 10 m
Diametro Max 600 mm
Altezza min di lavoro 2,7 m


Hydraulic piling rig CF1

Provided with a special mast divided in two sliding sections with pull-down force given by the counter-slide device to lower the mast group and achieve the lowest headroom working position. The CF2 is equipped with a short locking kelly bar which grant it to reach 10m deep working even under 2500mm. With a max undercarriage width of 1300mm (in working mode), reduceable to just 1000mm in transport mode, the CF2 can move in very narrow places and restricted areas. It could even get into the entrance door of civil buildings! Moreover the undercarriage is provided with rubber crawlers to work safely over fragile or luxury floors.

 

 
 
 
 
 
Request information on the machine
 
 
Richiedi Informazione sulla macchina